X-Plate XP3000S Premium Leather Baseball - Single

X-Plate XP3000S Premium Leather Baseball - EACH 

  • Buy 12 for $6.25 each and save 38%
  • Buy 120 for $5.62 each and save 44%


  • The Ultimate Super Seam Summer Baseball in Australia

  • The XP3000S Has Pure White Virgin Wool Windings!

  • The Best and Biggest Seam on the Market!
  • Stays in shape and harder longer!
  • Australian Clubs have asked for a better ball!
  • Here it is.
  • The Ultimate Baseball in Australia

  • BULK DISCOUNTS Available.

  • 1. We use a cushion cork centre. The best centre is made of a responsive round cork centre which is covered with a firm black rubber cushion surrounded by an activated springy red rubber cushion. Any top of the line ball will have this type of centre. Any ball that doesn’t have this type of centre is inferior.

  • 2. We use 100% virgin wool on all but the finish windings. Many so called top of the top line balls use 50% grey wool which is the wool that has not had all of the impurities washed and combed out. These 50% wool content balls go soft when hit by a bat time after time. The best balls will use a minimum 85% virgin wool that has been washed and combed to remove most of the impurities which simply add weight and less consistency to wool windings. Because a ball needs to meet certain weight restrictions (5 oz. plus or minus 3%), the cleaner the wool, the lighter the wool, the more wool can be used. The result is a tighter wound, harder and more durable ball. Virgin wool is more durable, more limber, more consistent in texture, and can generally be wound in one continuous strand. Washed and dried virgin wool will return to its initial shape faster, even after being struck time and time again.

  • 3. On the finish windings we use a combination of 3-ply polyester and 1-ply vinylon in place of nylon. Vinylon is a derivative of nylon that is stronger than plain nylon or poly/cotton thread. Vinylon is better for stiffness retention and helps keep the ball harder longer.

  • 4. Before the ball is stitched, we apply a full coat of extra strength rubber based adhesive. Many manufacturers use smaller amounts of adhesive simply to hold the cover in place while it is being stitched. A complete coat of adhesive will eliminate any possibility of the cover shifting on the core.

Additional Information

Brand X-Plate
Image Gallery N/A

You may also be interested in the following product(s)